0mm to 20mm grout joints
Interior and Exterior use
Water-repellent compound with water-drop effect
Suitable for marine use
High CATAS-tested chromatic uniformity
Easy to clean and maintain
Suitable for underfloor heating systems
Can be recycled as a mineral inert material, avoiding waste disposal costs and environmental impact
Natural bacteriostatic product stabilized with pure natural lime to avoid the use of pesticide additives.
Decorative Resina-cemento® (resin-cement) for grouting of ceramic and porcelain tiles, mosaic and natural stone in a 50-colour design range. Green product for bio-building.
The ground breaking hybrid grout Fugabella® Colour is ideal when decorating any surface in porcelain, ceramic tiles, mosaic and natural stone.
Fugabella® Colour achieves performance characteristics such as water repellence, very low water absorption, high surface hardness, high resistance to the most common acidic substances and total colour uniformity
High-performance grouting of joints from 0 to 20 mm, with a smooth finish, a high degree of hardness, water-repellence with water-drop effect.
Materials to be grouted: - porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats - natural stone, recomposed materials, marble. Intended use: - internal and external flooring and walls, in domestic, commercial and industrial applications and street furniture, in environments subject to heavy traffic, also in areas subject to thermal shock and freezing - swimming pools, tanks and fountains - underfloor heating systems.
Do not use on joints more than 20 mm in width, on floors and walls where specific chemical resistances or absolutely no water absorption are required; to grout elastic expansion or fractionising joints; on substrates which are highly deformable, not perfectly dry or subject to moisture rising.
When using Fugabella® Colour to grout joints in large surface areas, use suitable electrical equipment to increase application speed and cleaning times. In particular, cleaning with electric sponges can be easily carried out and ensures superior coverage and perfect results in aesthetic terms.
Before grouting highly porous surface coverings, or at high temperatures, it is advisable to wipe a damp sponge over the surface to counteract the porosity or to cool the surface, being careful not to cause water to stagnate in the joints.
It is recommended to use materials from the same production batch throughout. The partial or full replacement of mixing water with Fugaflex Eco eco-friendly flexibilizing latex for cement-based grouts, gives increased flexibility to Fugabella® Colour, reduces the elastic modulus, increases resistance to water and substrate adhesion.
Its use is recommended in the following specific applications: laying on wooden floors, laying on substrates or using materials with high thermal expansion or where surfaces are to be subsequently smoothed. Approved for marine use.