Hello guest
Your basket is empty
01604 330 003 
Hello guest
Your basket is empty
BENERFLEX +S1 is a powder adhesive consisting of cements, graded particle size aggregates, synthetic resins and special additives.
 
It has been formulated and developed for a rapid, reliable installation of ceramic, porcelain & natural stone tiles, even on non-absorbent substrates and onto substrates subject to slight dimensional variation.
 
Thanks to its particular composition, Benerflex +S1 can be mixed with a higher percentage of water to allow for complete "wetting" of the back of tiles, even on large format tiles, with no need for back buttering.
 
Suitable for use on:
 
Interior & exterior walls & floors
Concrete
Cement-based screeds
Anhydrite screeds
Cement-based & Gypsum-based boards
Heavy duty areas
In conjunction with ACQUASHIELD waterproofing systems
On top of old wall & floor tiles
Coverage 4-5m² @ 10mm bed.
 
Mixing ratio:
 
8.0 Litres of water to 25kg bag (Thixotropic mix)
9.5-10 litres of water to 25kg bag (Flow-bed mix)
Allow to stand for 2 minutes, then re-mix.

Products in this category:

Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings